A dishwasher does a lot of important work in the home. Washing dishes by hand is time-consuming and wastes a lot of water. A dishwasher is a sensible solution in this regard, saving you precious resources.
But trouble can strike any housewife when the dishwasher suddenly stops working. In this case, simple measures can help. If these don’t help, you need appliance repair guys, which can be found here: http://hvacandapplianceguys.com/.
What are the most common causes of dishwasher breakdowns?
When the automatic dishwasher start system detects a problem, it displays it on the display. The error is displayed in the form of a code. You can tell from this code what kind of problem has occurred. Error codes vary depending on the make of the dishwasher. In practice, the dishwasher often either stops turning on or hangs up during the washing process.
This is due to the following causes:
- Errors in the start-up or connection. To avoid this, it is advisable to read the operating instructions before starting.
- Bad water. The water may contain mineral impurities and other coarse substances. Fine particles in poor quality water prevent the dishwasher from working correctly.
- There can be sudden voltage fluctuations in the power supply. If you know that this is a possibility, take care in advance to minimize the effects of this phenomenon.
- Pay attention to the room in which your dishwasher is located. Traditionally, this is the kitchen. A kitchen is a damp space. Check for water leaks underneath your appliances. Damp air is also bad for appliances.
There are also many other types of breakdowns. A dishwasher may experience difficulty drawing or draining water. If you suspect this problem, the inlet hose may be clogged. A similar problem occurs when the filters and drain pump are clogged. If your dishwasher isn’t getting any water into it, the fill valve may be broken.
Sometimes the dishwasher has difficulty washing the dishes. The dishes come out dirty or damp. In this case, the appliance can detect a clogged nozzle or rocker’s arm. Such a breakdown results in the insufficient liquid being delivered to the dishwasher.
Another trivial cause of the malfunction is a dishwasher door which you have loosely closed. If the door isn’t closed tightly, the system won’t start the water intake process. As a result, your dishwasher may create a picture as if it is working, in fact, all the internal mechanisms are running empty.
A more serious problem is a module breakdown in the dishwasher. Here, you cannot do without the help of appliance repair company. Also, do not rush into a diagnosis. Only a professional dishwasher repairer can determine the exact cause of the breakdown.
Dishwasher breakdowns result from the failure of important parts. The important parts and components are as follows:
- Electric motor
- Water heater
- Water inlet valve
- Drain pump, pump
- Filters and filter fittings
- Chamber with rockers
- Control board – automatic control system, program part.
It should also be remembered that dishwasher malfunctions may be due to wear and tear which occurs after prolonged use. In practice, however, the incorrect operation is more often than not the cause of the problem.
The first aid to a broken dishwasher: what should I do?
If your dishwasher isn’t working or isn’t working correctly, try a simple procedure.
- Check that your dishwasher is correctly installed. To check this, open the instructions and read them carefully.
- Check the status of the electrical connection. Check that there is sufficient voltage.
- Check the water flow in the drain pipe – whether the water pressure and volume are sufficient.
- Remember whether you have previously attempted to repair your dishwasher with your own hands.
In the long term, it’s important to look after your appliances properly in order to ensure they last a long time. The maintenance, technical, temperature and other important requirements are usually specified in the instructions. If all these measures do not help you, do not waste time and call appliance repair guys.
What should I do if my dishwasher isn’t working properly?
Often problems cause your appliance to freeze, failing to cope with a running program. In this case, the appliance stops responding to button presses. If this happens to you, don’t go to the trouble of pushing a button and trying to fix the appliance by force. Simply try to gently work out the cause of the problem using the following methods:
- Check the door lock. Open it and carefully inspect the lock latch. If small particles get caught in the latch, the door will not close tightly and the washing program will not start.
- Check the strength of the start button. If your appliance has been in use for quite some time, repeated pressing of this button may have caused it to lose stability in its cage and now there is no contact with the mechanism. You can carefully remove the control panel, check the buttons and then put them back in place.
- If the dishwasher closes normally but the wash program does not start, the problem could be with the level sensor. In this case, the level sensor will have to be replaced with a new one.
- If the water comes in but does not heat up, then the appliance also freezes. Washing is only possible with heated water. If this process is delayed, you may suspect a problem with the heating elements. In this case, one of the heating system parts may have to be replaced.
- If you hear an unusual noise when the dishwasher is running, this is due to worn bearings. In this case, you will hear an additional loud noise from the appliance which was not there before. This is due to a malfunction of the oil seal. The repair technician will tell you the exact problem and which part needs to be replaced.
If all these simple manipulations do not help to get your appliance running, then stop taking active steps. The problem may be more serious and only an appliance repair technician can help.
